Office Utilisation Study: 5 Methods Reviewed Before You Renew

An honest review of the five ways to run an office utilisation study, what each one really tells you, and which to trust before a lease decision.
Your lease break or expiry is coming, and someone on the board has asked a fair question: how much of this office do we really use? You look for the answer and find three different numbers. The door system says one thing, the booking system says another, and the people on the floor say it feels packed on a Tuesday.
An office utilisation study is supposed to settle that argument. The trouble is that there are five common ways to run one, and they do not measure the same thing. This review rates each method for the decision you are facing: stay, move or resize. It covers what each one measures, where it misleads, who it suits and which combination we would trust.
Why an office utilisation study matters before a lease event
Most offices were planned around a rule of thumb that no longer holds. In July 2025 the British Council for Offices said the long standing planning benchmark of 80% utilisation should give way to a more realistic figure of 66%. The same research put average occupancy at 40% from Tuesday to Thursday and 30% across all weekdays.

Other trackers tell a similar story. Remit Consulting's national survey recorded a post pandemic high of 44.1% in the week ending 30 January 2026, as reported by HR Grapevine.
Those are national averages. Your office will be different, and the gap between your real number and the one your lease was signed on is where the money sits. Sign a new five or ten year lease on a guess and you carry that guess for the whole term. We made the wider case in why a workplace study should come before your next lease.
The five methods at a glance
The ratings below are Squaredot's own, out of 5, for one job only: informing a stay, move or resize decision. A method that scores low here can still be useful for something else.
Method | What it measures | Main weakness | Rating |
Swipe card data | Who entered the building, and when | Says nothing about what happened after the door | 2/5 |
Booking system data | What people intended to use | Booked is not the same as used | 2/5 |
Staff survey | What people need and how they feel | Opinion, not measurement | 3/5 |
Occupancy sensors | Which desks and rooms are in use, all day | Counts presence, not activity or reason | 4/5 |
Observation study | What people are doing in each space | A snapshot of one or two weeks | 4/5 |

1. Swipe card data: 2 out of 5
This is the data most businesses already own, which is why it is usually the first number in the board pack. It tells you how many people came through the door each day and gives a reliable picture of the weekly pattern.
What it cannot tell you is anything about the space. A person who badges in at nine and leaves at eleven counts the same as one who stays all day. It does not show which floors, desks or rooms were used. It also undercounts where people follow a colleague through an open door.
Use it for: peak day headcount and the shape of the week. Do not use it for: deciding how many desks or meeting rooms you need.
2. Booking system data: 2 out of 5
Desk and room booking systems produce tidy reports, and tidy reports are persuasive. The weakness is that they record intention. Rooms get booked and never used, and plenty of desks get used without being booked.
If your booking data says meeting rooms are full while people complain they can never find one, you are looking at this problem. We covered it in meeting rooms booked out and still not being used.
Use it for: spotting demand patterns and no show rates. Do not use it for: proving how much space is occupied.

3. Staff survey: 3 out of 5
A survey is the only method that asks people what they need. It surfaces the things no sensor can see: that the quiet rooms are too few, that the team neighbourhood is in the wrong place, that people come in for colleagues and not for desks. Our own Dynamic Workplace Report surveyed 80 businesses and 30,000 people on how they work.
The limit is obvious. People describe how they think they work, and that differs from how they do work. A survey on its own will tend to produce a longer wish list, not a smaller floor plate.
Use it for: the brief, the priorities and the reasons behind the numbers. Do not use it for: the numbers themselves.
Not sure where your office stands? The Workplace Design Scorecard is a quick way to check how well your space supports the way your people work, before you commission anything.
4. Occupancy sensors: 4 out of 5
Sensors under desks, in rooms or on ceilings record whether a space is occupied, minute by minute, for as long as you leave them in. That gives you the thing the first two methods cannot: real use of each desk, room and zone, including peaks, quiet days and how long people stay.
The drawbacks are cost, time and meaning. Sensors need buying or renting, installing and several weeks of data before the picture is fair. Staff need telling what is being measured and why, or trust suffers. And a sensor tells you a room held two people for an hour. It does not tell you the room seats twelve, or that they only used it because every small room was taken.
Best for: larger offices, multiple floors and anyone who wants continuous evidence. Not for: a small single floor office with a decision due next month.

5. Observation study: 4 out of 5
In an observation study, trained observers walk a set route through the office at regular intervals, usually for one or two weeks, and record what is happening in every space: occupied, empty, signs of life, and what activity is taking place.
This is the method that explains the numbers. It shows that the big boardroom is used by two people, that the breakout area is a corridor, that focus work is happening in meeting rooms because the open floor is too loud. Those findings change the design, and the design changes how much space you need.
Its weakness is that it is a snapshot. Pick an unusual fortnight and you get an unusual answer, so the weeks need choosing with care.
Best for: any office with a lease decision inside the next 12 to 18 months. Not for: ongoing monitoring after you have moved in.
The verdict: which office utilisation study should you choose?
No single method is enough. The swipe card and booking data you already own are a free starting point, and they are the weakest evidence for a lease decision.
For a stay, move or resize decision we would combine three things:
Step | Method | What it gives you |
1 | An observation study, or sensors if the estate is large | Real use of every desk, room and zone |
2 | A staff survey | The reasons behind the numbers |
3 | Your existing swipe card data | A check that the study weeks were typical |
Together they tell you how much space you use, what you use it for and what is missing. That is the brief a designer needs, and it is the evidence a board needs before signing. If the result shows you are paying for space nobody uses, your office is 42% full sets out what to do with it, and refurbish vs relocate covers the next decision.
Who this is for, and who it is not for
A full study is for you if | It is more than you need if |
You have a lease break or expiry in the next two years | Your lease has many years left to run |
More than one team shares the space | You have a small, single team office |
You have a real choice between staying, moving and resizing | You have no plans to change the layout |
If you are in the second column, your swipe card data and a short survey will tell you enough.
One point on timing. Break clauses carry strict notice periods, so the study needs to finish well before the notice date. Our guide to office lease break clause mistakes explains why.
Frequently asked questions
What is an office utilisation study?
It is a structured measurement of how your office is used: how many people come in, which desks, rooms and shared spaces they use, for how long and for what. The output is evidence for how much space you need and what kind.
How long does an office utilisation study take?
An observation study usually runs for one or two weeks on site. A sensor study needs several weeks of data to be fair. Allow extra time for analysis and for a staff survey alongside.
Is swipe card data enough to decide how much office space we need?
No. It shows who entered the building, not what they used once inside. It is useful for peak day headcount and little else.
Are occupancy sensors better than an observation study?
They answer different questions. Sensors give continuous counts over a long period. Observation shows what people are doing and why a space works or fails. For a lease decision the strongest answer uses one of them plus a staff survey.
The bottom line
An office utilisation study is only as good as the method behind it. Door data and booking data are easy to get and easy to misread. Measured use plus the reasons behind it is what protects you from signing for the wrong amount of space.
Squaredot is a workplace interior design consultancy, not a fit out company, and measuring how an office is used is the first stage of our work. If you want a quick read on your own space first, start with the scorecard.
