top of page

Office Space Per Person UK: 6 Sizing Mistakes to Avoid

Writer: Squaredot
Squaredot
10 minutes ago
6 min read

Short answer: there is no single right figure for office space per person in the UK. The legal minimum works out at about 4.6 sq m each, the British Council for Offices plans at 10 sq m each, and its latest research points to 15 sq m per person who is actually in. Which one applies depends on how your people use the office, and most sizing mistakes come from picking a number before measuring that.

Your lease event is coming. Someone has asked how much space you need, and the quickest answer is headcount multiplied by a number from a search result. That sum can leave you paying for a floor that sits half empty, or squeezing people into a space they avoid.

This guide explains what the main UK figures for office space per person really mean, the six sizing mistakes we see most often, and how to size your next office on evidence.

Office space per person in the UK: the three figures that matter

Three numbers get quoted, and they do three different jobs.

Figure

Space per person

What it is for

Source

Legal minimum

11 cubic metres, about 4.6 sq m of floor with a 2.4 m ceiling

The floor below which a workroom is too crowded

HSE, Workplace Regulations 1992

Planning density

10 sq m, about 108 sq ft

How many people a floor is designed to hold

British Council for Offices, reported by Savills in 2023

Effective density

15 sq m, about 161 sq ft

Space per person actually present, allowing for hybrid attendance

British Council for Offices, reported by CoStar in 2025

Bar chart of UK office space per person figures: legal minimum 4.6 sq m, BCO planning density 10 sq m and BCO effective density 15 sq m

The HSE guidance on room space comes from Regulation 10 of the Workplace (Health, Safety and Welfare) Regulations 1992. It is a minimum, and HSE itself warns that it may be insufficient where furniture takes up much of the room. The British Council for Offices figures are design guidance, not law.

Mistake 1: treating the legal minimum as a target

The 11 cubic metre rule exists to stop overcrowding. It is not a recommendation for a good office. At a typical 2.4 m ceiling it gives each person about 4.6 sq m, which is roughly 50 sq ft. It also does not apply to rooms used for meetings.

How to avoid it. Use the legal minimum as a safety check on your densest room, never as the number you multiply headcount by.

Mistake 2: multiplying headcount by one benchmark

Headcount times 10 sq m is the most common sum in office planning. It assumes every person on the payroll needs a place every day. In a hybrid organisation that is rarely true.

Here is an illustrative example. A business with 100 people would need 1,000 sq m at 10 sq m each. If measurement showed that no more than 60 people are ever in on the busiest day, the same density would need 600 sq m. The real answer sits somewhere between, because quieter desks are often replaced by more meeting and project space. Only your own data tells you where.

How to avoid it. Start from measured attendance, not the payroll. Our post on why your office is 42% full shows what that gap can look like.

Open plan office interior with modern furniture

Mistake 3: sizing on the average day instead of the peak

Averages hide the days that hurt. British Council for Offices research reported by CoStar in July 2025 found occupancy averaging 40% from Tuesday to Thursday, compared with 30% across all weekdays.

Size for the weekly average and midweek feels cramped. Size for a peak that happens twice a year and you pay for empty space the rest of the time.

How to avoid it. Measure by day and by hour for several weeks, then decide which peak you are designing for and how you will manage the days above it.

See how 30,000 people really use their offices

Squaredot's Dynamic Workplace Report surveyed 80 businesses and 30,000 people on how they work. It is a useful benchmark to hold your own attendance and space figures against before you commit to a size.

Mistake 4: counting desks and forgetting everything else

A density figure covers the whole usable floor, not only the desk. Meeting rooms, call booths, project space, the kitchen and the routes between them all sit inside that 10 sq m.

When a team cuts desks and keeps the same floor, the saved space should go somewhere deliberate. When a team cuts the floor and keeps the same desks, the meeting rooms and quiet space usually vanish first, and those are the things people travel in for.

How to avoid it. Count by activity. List what people come in to do, then give each activity the space it needs. Our ranking of the best office layout for hybrid working covers the options.

Mistake 5: using benchmarks that have moved

Benchmarks change, and old ones linger in spreadsheets. Savills reported in May 2023 that the British Council for Offices had replaced its high density allowance of one person per 8 sq m with a standard one person per 10 sq m. In 2025 its utilisation benchmark fell to 66%, down from a long held 80%, and effective density rose from 12.5 sq m to 15 sq m per occupant.

Key stat graphic: the BCO utilisation benchmark is 66% in 2025, down from the long held 80%

How to avoid it. Ask where every figure in your space model came from and when. If nobody knows, replace it with a current source or with your own measurement.

Mistake 6: signing first and measuring later

The costliest version of every mistake above is making it inside a new lease. Once the size is fixed for five or ten years, a wrong number becomes rent, rates and service charge on space you do not use, or a fit out that has to be redone.

How to avoid it. Measure before you negotiate. Our guide to office lease break clause mistakes explains why the dates arrive sooner than most teams expect.

Shared office space with desks and tables

The six mistakes at a glance

Mistake

What it leads to

Do this instead

Legal minimum as a target

A crowded office people avoid

Use it only as a safety check

Headcount times one benchmark

Paying for desks nobody uses

Start from measured attendance

Sizing on the average day

Cramped midweek, empty Fridays

Measure by day and hour, choose your peak

Counting only desks

No meeting or quiet space

Plan by activity

Old benchmarks

A model built on outdated numbers

Check the source and date of every figure

Signing before measuring

Years of rent on the wrong size

Measure before you negotiate

How to work out your own office space per person

  1. Measure real use. Record attendance and space use by day and hour for several weeks. Our review of office utilisation study methods compares the ways to do it.

  2. Pick your design peak. Decide which busy day you are sizing for.

  3. List activities. Work out what people come in to do and how much of each space type that needs.

  4. Apply a current density. Use today's benchmarks as a sense check on the total.

  5. Test it against your lease options. Price staying, moving and resizing with the same numbers, including fit out cost per sq ft.

Who this guide is for, and who it is not for

It is for you if you are responsible for an office with a lease break or expiry ahead, and you need a defensible answer to how much space to take.

It is not for you if you need a legal view on your lease or a formal measured survey of a building. A solicitor and a chartered surveyor are the right people for those.

Frequently asked questions

How much office space per person is normal in the UK?

The British Council for Offices plans at 10 sq m per person, about 108 sq ft. Its 2025 research gives an effective density of 15 sq m per person present, because fewer people are in at once.

What is the legal minimum office space per person?

HSE guidance says 11 cubic metres per person, which is about 4.6 sq m of floor with a 2.4 m ceiling. It is a minimum, not a design standard.

Does the space per person include meeting rooms?

The British Council for Offices densities describe the whole usable floor, so shared space is inside the figure. The legal minimum is different. It applies to workrooms and not to rooms used for meetings.

Should I size my office on headcount or attendance?

Attendance, measured over several weeks, with headcount as a ceiling. Headcount alone assumes everyone is in every day.

The bottom line

Office space per person is a result, not an input. Measure how your people use the office, decide what the space needs to do, then let the benchmarks check your answer. Squaredot is a workplace interior design consultancy, not a fit out company, and measuring how offices are really used is where our work starts.

Compare your own figures with how 30,000 people across 80 businesses say they work.

Get workplace design insights before anyone else

Monthly insights on workplace strategy, design trends and space planning, delivered straight to your inbox. No spam, unsubscribe anytime.

bottom of page